Categories

dril destroy taps

  • dril destroy taps

  • dril destroy taps

  • dril destroy taps

dril destroy taps
Product Code: S44
Availability: In Stock
0.00€
Ex Tax: 0.00€
codice d2 d1 L1 L2 MASCHIO Prezzo Qta
S4402 2 2 50 10 M3 24.00
S44025 2,5 2,5 50 15 -------- 24.00
S4403 3 3 50 15 M4 24.00
S44035 3,5 3,5 50 15 -------- 24.00
S4404 4 4 50 20 M5-M6 24.00
S44045 4,5 4,5 50 20 -------- 28.00
S4405 5 5 50 25 ----- 28.00
S4406 6 6 60 30 M8 28.00
S4407 7 7 75 30 -------- 32.00
S4408 8 8 80 30 M10 32.00
S4409 9 9 100 35 -------- 32.00
S4410 10 10 100 35 M12-M14 39.00
S4411 11 11 100 35 -------- 39.00
S4412 12 12 100 35 M16-M20 42.00
-------------------- -------- KIT IN BOX -------- Prezzo
S44KITM3-8 KIT da M3 a M8 -------- -------- 88.00
S44KITM3-10 KIT da M3 a M10 -------- -------- 108.00
S44KITM3-14 KIT da M3 a M14 -------- -------- 159.00

The solid carbide TAP destroyer tip is designed to destroy broken taps inside holes.

the machining is performed cold.

INSTRUCTIONS:

1) it is advisable if possible to perform a flattening of the broken tap, using a tip of a larger size than the one we need to use to destroy the broken tap. Center yourself on the irregular surface of the tap, slowly descend with the feed (as little as possible) so that the tip makes a small plane with the center. Replace the tip with the one of the right size to destroy the tap. It is important that the machine and the piece are rigid with a working speed between 1500 and 3500 rpm feed 0.01 per revolution.


2) remove the pieces of the tap that are left along the walls, using a pointed tool. If it is convenient, the use of coolant must be continuous and abundant.


3) The tap destroyer tool can also be used to drill from solids in a single operation 60/62HRC hardened steel such as bearings, files, HSS rods, hardened stainless steel, stellite steel.


4) to make holes in very tight tolerance with an excellent degree of finish, avoiding in many cases the reaming process.

Related Products