Categories

DCMT PC chip breaker for MEDIUM PROCESSING

Brands Shogun Tools
Product Code: DCMT CP
Availability: In Stock
0.00€
Ex Tax: 0.00€
Codice I t R IC Grado Prezzo Qta
DCMT 070204 CP 7,3 2,38 0,4 6,35 SH 5218 6.40
DCMT 070204 CP 7,3 2,38 0,4 6,35 SH 5119 6.40
DCMT 070204 CP 7,3 2,38 0,4 6,35 SH 5219 6.40
DCMT 070204 CP 7,3 2,38 0,4 6,35 SH 0809 6.40
DCMT 070204 CP 7,3 2,38 0,4 6,35 SH 5107 6.40
DCMT 070204 CP 7,3 2,38 0,4 6,35 SH 0003 5.90
DCMT 070204 CP 7,3 2,38 0,4 6,35 SH 0103 6.40
-------------------- -------- -------- -------- -------- -------- Prezzo
DCMT 11T304 CP 11,2 3,97 0,4 9,52 SH 5118 8.00
DCMT 11T304 CP 11,2 3,97 0,4 9,52 SH 5218 8.00
DCMT 11T304 CP 11,2 3,97 0,4 9,52 SH 5129 8.00
DCMT 11T304 CP 11,2 3,97 0,4 9,52 SH 5229 8.00
DCMT 11T304 CP 11,2 3,97 0,4 9,52 SH 0809 8.00
DCMT 11T304 CP 11,2 3,97 0,4 9,52 SH 0003 7.50
DCMT 11T308 CP 10,8 3,97 0,8 9,52 SH 5118 8.00
DCMT 11T308 CP 10,8 3,97 0,8 9,52 SH 5218 8.00
DCMT 11T308 CP 10,8 3,97 0,8 9,52 SH 5129 8.00
DCMT 11T308 CP 10,8 3,97 0,8 9,52 SH 5229 8.00
DCMT 11T308 CP 10,8 3,97 0,8 9,52 SH 0003 7.50

DCMT 0702..  DCMT 11T3... 55° positive rhomboidal insert with "CP" chip breaker hole specific for MEDIUM WORKING


indicative parameters:                side 07     Radius 0.4 feed 0.07-0.20 mm/rev     depth of cut 0.4-1.5mm

                                                                          Radius 0.8 feed 0.07-0.20 mm/rev     depth of cut 0.4-2.0mm


                                                         side 11     Radius 0.4 feed 0.10-0.25 mm/rev      depth of cut 0.6-1.5mm

                                                                          Radius 0.8 feed 0.10-0.25 mm/rev      depth of cut 0.6-2.0 mm


  


carbide grade:


SH 5218  (P15-P30) for a wide range of turning on steels. Excellent combination of wear resistance and toughness.

SH 5229 (M15-M30) (S10-S30)  for medium and low speed turning of stainless steel, exotic steels, low carbon steels. For high-speed machining of stainless steel.

SH 0809 (M20-M40) (S20-S40) for medium and low speed turning of nickel-based steels, exotic materials registered as super alloys INCONEL, HASTELLOY, DUPLEX, INCOLOY, NIMONIC.

SH 5107  (K10-K25) For machining of gray cast iron and ductile cast iron • For continuous and interrupted cutting of gray cast iron and ductile cast iron.


cermet grade:

SH 0003 (P05-P15) (M05-M15) (K05-K15  )cermet suitable for finishing and semi-finishing of steel, cast iron and stainless steel

SH 0103 (P05-P15) (M05-M15) (K05-K15) cermet coated, better cutting conditions with lubrication, longer tool life and better cutting quality.